voltage max max ripple ault part no. dc amps watts p-p max ault incorporated 7105 northland terrace | minneapolis, minnesota 55428 | usatel (1) 763-592-1900 fax (1) 763-592-1911 | e-mail info@aultinc.com | web www.aultinc.com ? copyright 2002 ault inc. pw122 switch-mode power supply ? 100-240 vac universal input ? desktop style ? single output to 120w ? regulated output with low ripple ? meets safety agency requirements ? complies with emi/rfi regulations ? ce compliant ? impact resistant polycarbonate enclosure ? private label marking available ? 3 year warranty ? modified and custom designs also available pw122 ite 120 watt series pw122 x a 05 xx __ 01 product manufacturing design voltage connector input standard (no family location revision dc #51 - standard configuration/ modifications, name (volume changes 12v; #3 - model type special artwork dependent) standard 24v (see pg. 2) or special and 48v packaging) ault part no. key ault part no. key pw122 pw122xa12xxf01 12v 10.00 120.0 120mv PW122XA24XXF01 24v 5.00 120.0 240mv pw122xa48xxf01 48v 2.50 120.0 480mv
ault incorporated 7105 northland terrace | minneapolis, minnesota 55428 | usatel (1) 763-592-1900 fax (1) 763-592-1911 | e-mail info@aultinc.com | web www.aultinc.com ? copyright 2002 ault inc. input configuration pw122 ite 120 watt series iec320 w/ground c14 (f) input rated voltage 100-240 vac operating voltage 90-264 vac line frequency 47-63 hz current 2a max.at 90 vac input protection internal primary current fuse power factor correction complies with en61000-3-2 and en61000-3-3 (active) output combined line and load 1% excluding cord voltage regulation ripple see table transient response 0.5 msec. for 50% load change typical holdup time 16.7 msec min.over entire input range protection overcurrent protection, short circuit protection cord and connector 12v: 6 ft, 4 conductor, 18 awg, ault #51 connector, pinout: pins 1-4=+v; 3, 6=common with overmolded ferrite core. 24v & 48v: 5 ft, 2 conductor, 18 awg, with overmolded ferrite core, ault #3 connector, center positive. safety approvals agency listings culus60950, tuv/iec en60950, australian, japanese certification available - extra fees apply electrical earth ground less than 750 ua leakage current efficiency 86%typical emi complies with emc directives ce ce compliant mtbf min. 100,000 hours environmental operating temperature 0o to 40o c with no derating storage temperature -30o to +85o c relative humidity 5% to 95% non-condensing altitude 0-10,000 feet cooling convectional - non vented case mechanical case and dimensions 9.0l x 2.9w x 2.0h (in) 229l x 74w x 51h (mm) case material 94v0 polycarbonate; black is standard color; other colors available - extra charges may apply weight 24 ounces, 684 grams (excluding cord) connector
|
